NSN 5306-01-203-6812 · NIIN 012036812 · FSC 5306
NO DASHES 5306012036812
In Stock
BOLT,INTERNAL WRENCHING
Bolts
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MAXIMUM 0.625 |
| AASB | FASTENER LENGTH | INCHES MAXIMUM 0.625 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.308 AND INCHES MAXIMUM 0.315 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.489 AND INCHES MAXIMUM 0.500 |
| AATC | EXTENDED WASHER DIAMETER | INCHES NOMINAL 0.625 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.055 AND INCHES MAXIMUM 0.065 |
| AAWC | FIRST DIAMETER FROM HEAD | INCHES MINIMUM 0.205 AND INCHES MAXIMUM 0.206 |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | INCHES NOMINAL 0.563 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.221 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE II,CL 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CS1014-01 | 58794 |
| FT1148-13-14 | 58998 |
| HFU 7900-12D-M-16 | 72914 |
| HFU 7900-12D-M-16 | 97928 |
| S-2581 | 97928 |
| HFU7900-12D-M-1 | 97928 |
| HFU7900-12D-M-16 | 17446 |