NSN 5306-01-209-7862 · NIIN 012097862 · FSC 5306
NO DASHES 5306012097862
In Stock
BOLT,SHOULDER
Bolts
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.443 AND INCHES MAXIMUM 0.493 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.578 AND INCHES MAXIMUM 0.608 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.290 AND INCHES MAXIMUM 0.310 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.303 AND INCHES MAXIMUM 0.323 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.438 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.059 AND INCHES MAXIMUM 0.079 |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.2802 AND INCHES MAXIMUM 0.2807 |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.135 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.032 AND INCHES MAXIMUM 0.042 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.081 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ASXK | HOLE QUANTITY | 4 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 0.386 AND INCHES MAXIMUM 0.426 |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
19 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| S11-1063-4D2 | 57928 |
| 74328-4D2Y | 56878 |
| S11-1063-4DH2 | 57928 |
| 74328-4DH2Y | 56878 |
| ST3M607-4D2 | 59563 |
| ST3M607-4DH2 | 59563 |
| MB87-4D2 | 73197 |
| MB87-4DH2 | 73197 |
| ST3M607-4DH2 | 76301 |
| ST3M607-4D2 | 76301 |
| 74328-4D2Y | 80539 |
| 74328-4DH2Y | 80539 |
| VS3061-4DH2 | 92215 |
| VS3061-4D2 | 92215 |
| BM3326-4DH2Y | 97928 |
| MB87-4D2 | L4528 |
| VAL23033-4D2X | 06710 |
| VAL23033-4DH2X | 06710 |
| BM3326-4D2Y | 17446 |
Supersedes
This item replaces cancelled NIIN 012120047. An older drawing citing one of those numbers resolves here.