NSN 5306-01-256-4461 · NIIN 012564461 · FSC 5306
NO DASHES 5306012564461
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.349 AND INCHES MAXIMUM 0.416 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.484 AND INCHES MAXIMUM 1.531 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.177 AND INCHES MAXIMUM 0.197 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.081 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.115 AND INCHES MAXIMUM 1.135 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.356 AND INCHES MAXIMUM 1.423 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST3M729-5D18 | 56878 |
| ST3M729-5D18 | 58998 |
| MB145-5D18 | 73197 |
| ST3M729-5D18 | 76301 |
| ST3M729-5D18 | 92215 |
| ST3M729-5D18 | 97928 |
| MB145-5D18 | L4528 |
| ST3M729-5D18 | 06725 |
| ST3M729-5D18 | 06950 |
| ST3M729-5D18 | 06710 |
| ST3M729-5D18 | 0ZC92 |
| ST3M729-5D18 | 17446 |