NSN 5306-01-298-1293 · NIIN 012981293 · FSC 5306
NO DASHES 5306012981293
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.338 AND INCHES MAXIMUM 1.388 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 6.723 AND INCHES MAXIMUM 6.753 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.690 AND INCHES MAXIMUM 0.710 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.923 AND INCHES MAXIMUM 0.938 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 1.615 AND INCHES MAXIMUM 1.625 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.116 AND INCHES MAXIMUM 0.136 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.8730 AND INCHES MAXIMUM 0.8740 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.875 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 5.365 AND INCHES MAXIMUM 5.385 |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S6487 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-8837 TY2 CL2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS21297-14086 | 80205 |
| NASM21297 | 80205 |
| NASM8906 | 80205 |
| MS21297-14086 | 96906 |