NSN 5306-01-335-2897 · NIIN 013352897 · FSC 5306
NO DASHES 5306013352897
In Stock
BOLT,ASSEMBLED WASHER
Bolts
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.016 AND INCHES MAXIMUM 1.066 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.776 AND INCHES MAXIMUM 3.806 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.375 AND INCHES MAXIMUM 0.390 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 1.052 AND INCHES MAXIMUM 1.064 |
| AAVW | WASHER QUANTITY | 1 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.151 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.750 |
| CBBL | FEATURES PROVIDED | SPACER |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | FASTENER ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 3.514 AND INCHES MAXIMUM 3.564 |
| CSPG | PRIMARY WASHER OUTSIDE DIAMETER | INCHES NOMINAL 1.250 |
| CTHW | PRIMARY WASHER STYLE | |
| CTJJ | PRIMARY WASHER MATERIAL THICKNESS | INCHES NOMINAL 0.062 |
| MATT | MATERIAL | PRIMARY WASHER STEEL COMP 1330 OR STEEL COMP 4130 |
| MATT | MATERIAL | FASTENER STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | PRIMARY WASHER FED STD ALL MATERIAL RESPONSES FED 66 |
| SFTT | SURFACE TREATMENT | FASTENER CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FASTENER FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2,CL 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |