ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Fasteners & Fastening Hardware / NSN 5306-01-348-0794
NSN 5306-01-348-0794  ·  NIIN 013480794  ·  FSC 5306
NO DASHES 5306013480794
In Stock

BOLT,CLOSE TOLERANCE

Bolts

Technical characteristics

20 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTHINCHES MAXIMUM 0.370
AASBFASTENER LENGTHINCHES MINIMUM 1.615 AND INCHES MAXIMUM 1.635
AASKHEAD STYLE
AASUHEAD HEIGHTINCHES MINIMUM 0.126 AND INCHES MAXIMUM 0.141
AATBWIDTH BETWEEN FLATSINCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.439
AAURGRIP DIAMETERINCHES MINIMUM 0.2487 AND INCHES MAXIMUM 0.2492
AAWBSHANK UNTHREADED HOLE DIAMETERFIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086
AHYMNOMINAL THREAD DIAMETERINCHES 0.250
ANEEGRIP LENGTHINCHES MINIMUM 1.125 AND INCHES MAXIMUM 1.135
CMLPTHREAD QUANTITY PER INCH28
CRZSDISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTERFIRST SHOULDER INCHES NOMINAL 1.500
FEATSPECIAL FEATURESBALL, CRES QQ-S-763, TYPE 440C; PLUNGER AND PAWL, STEEL AMS 5629GER AND PAWL,
MATTMATERIALFASTENER NICKEL ALLOY 718
MATTMATERIALSPRING STEEL CORROSION RESISTING OR COBALT ALLOY
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONFASTENER ASSN STD SINGLE MATERIAL RESPONSE A-S 5662
SFTTSURFACE TREATMENTOVERALL PASSIVATE
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONOVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35
THSDTHREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)

Cross-references

9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.

Manufacturer part numberCAGE
03A094-4-181W025
03A094-4-201W025
LB57-4-1873197
03A094-4-1876823
AS374-4-1884256
AS 374-4-2084256
LB57-4-18L4528
SLB131-4-1816258
SLB131-4-2016258