NSN 5306-01-398-9476 · NIIN 013989476 · FSC 5306
NO DASHES 5306013989476
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.277 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.372 AND INCHES MAXIMUM 1.392 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.095 AND INCHES MAXIMUM 0.110 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
| AAUM | LOCKING FEATURE | GRIP RETAINER |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1894 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.080 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.000 AND INCHES MAXIMUM 1.016 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | FASTENER ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 41.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 1.294 |
| MATT | MATERIAL | LOCKING FEATURE STEEL COMP 630 OR STEEL COMP 631 OR STEEL COMP 440C |
| MATT | MATERIAL | FASTENER STEEL COMP 4340 |
| MATT | MATERIAL | SPRING STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 631 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LOCKING FEATURE ASSN STD 1ST MATERIAL RESPONSE A-S 5643 OR ASSN STD 2ND MATERIAL RESPONSE A-S 5644 OR FED SPEC 3RD MATERIAL RESPONSE QQ-S-763 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SPRING FED SPEC 1ST MATERIAL RESPONSE QQ-W-423 OR FED SPEC 2ND MATERIAL RESPONSE QQ-W-423 COND B OR ASSN STD 3RD MATERIAL RESPONSE A-S 5678 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FASTENER MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-8844 CL 1 |
| SFTT | SURFACE TREATMENT | LOCKING FEATURE PASSIVATE |
| SFTT | SURFACE TREATMENT | FASTENER CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | LOCKING FEATURE FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FASTENER ASSN STD SINGLE TREATMENT RESPONSE A-S 2401-3 AND FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| SS27576-3-16 | 29372 |
| SS27576-3-16 | 58794 |
| SS27576-3-16 | 78286 |
| SS27576-3-16 | 80539 |
| SS27576-3-16 | 84256 |