NSN 5306-01-418-5552 · NIIN 014185552 · FSC 5306
NO DASHES 5306014185552
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.453 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.953 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.234 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.679 AND INCHES MAXIMUM 0.690 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.080 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4358 AND INCHES MAXIMUM 0.4369 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.116 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | SECOND HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.116 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.490 AND INCHES MAXIMUM 1.510 |
| ASXK | HOLE QUANTITY | 3 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 1.829 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | SECOND HOLE INCHES NOMINAL 1.829 |
| FEAT | SPECIAL FEATURES | DRILLED HOLES IN SHANK SHALL BE PERPENDICULAR |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR ASSN STD 2ND MATERIAL RESPONSE A-S 6322 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| SFTT | SURFACE TREATMENT | BEARING SURFACE OF HEAD CHROMIUM |
| SFTT | SURFACE TREATMENT | GRIP CHROMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | GRIP FED SPEC SINGLE TREATMENT RESPONSE QQ-C-320 CL 2 TY 1 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BEARING SURFACE OF HEAD FED SPEC SINGLE TREATMENT RESPONSE QQ-C-320 CL 2 TY 1 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| S4928913-7D24 | 27624 |
| S4928913-7D24 | 50945 |
| S4928913-7D24 | 56878 |
| S4928913-7D24 | 88277 |
| S4928913-7D24 | 97928 |
| S4928913-7D24 | 06725 |
| S4928913-7D24 | 06950 |
| S4928913-7D24 | 17446 |