NSN 5306-01-419-1366 · NIIN 014191366 · FSC 5306
NO DASHES 5306014191366
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.453 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 5.953 AND INCHES MAXIMUM 5.968 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.265 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.741 AND INCHES MAXIMUM 0.752 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4982 AND INCHES MAXIMUM 0.4991 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | THREADS INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.116 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 5.490 AND INCHES MAXIMUM 5.510 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | THREADS INCHES NOMINAL 5.477 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | TWO HOLES IN THREADS 90 DEGREES APART |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 6150 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | PRIMARY WASHER CHROMIUM |
| SFTT | SURFACE TREATMENT | THREADS CADMIUM |
| SFTT | SURFACE TREATMENT | GRIP CHROMIUM |
| SFTT | SURFACE TREATMENT | HEAD CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | GRIP MFR REF SINGLE TREATMENT RESPONSE DS 9.84, TYE 1 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PRIMARY WASHER MFR REF SINGLE TREATMENT RESPONSE DS 9.84, TYE 1 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | THREADS MFR REF SINGLE TREATMENT RESPONSE DS 9.74, TYE 1 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | HEAD MFR REF SINGLE TREATMENT RESPONSE DS 9.74, TYE 1 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| S4928913-8-88 | 27624 |
| S4928913-8-88 | 50945 |
| S4928913-8-88 | 88277 |
| 5306PL1548205 | 9009H |
| S4928913-8-88 | 97928 |
| S4928913-8-88 | 96878 |
| S4928913-8-88 | 06725 |
| S4928913-8-88 | 06950 |
| S4928913-8-88 | 0K620 |
| S4928913-8-88 | 17446 |