NSN 5306-01-456-6979 · NIIN 014566979 · FSC 5306
NO DASHES 5306014566979
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.543 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.716 AND INCHES MAXIMUM 2.746 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.312 AND INCHES MAXIMUM 0.327 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.928 AND INCHES MAXIMUM 0.940 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.623 AND INCHES MAXIMUM 0.624 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | THREADS INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.151 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.178 AND INCHES MAXIMUM 2.198 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 95000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | THREADS INCHES MINIMUM 2.544 AND INCHES MAXIMUM 2.559 |
| FEAT | SPECIAL FEATURES | TWO HOLES IN THREADS AT 90 DEGREES ANGULAR |
| MATT | MATERIAL | OVERALL STEEL COMP 4340 OR STEEL COMP 8735 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR ASSN STD 2ND MATERIAL RESPONSE A-S6322 |
| SFTT | SURFACE TREATMENT | FASTENER CADMIUM AND CHROMATE |
| SFTT | SURFACE TREATMENT | BEARING SURFACE OF HEAD CHROMIUM |
| SFTT | SURFACE TREATMENT | GRIP CHROMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FASTENER FED SPEC ALL TREATMENT RESPONSES QQ--416, TYE 2, CLASS 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | GRIP FED SPEC SINGLE TREATMENT RESPONSE QQ-C-320, TYE 1, CLASS 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BEARING SURFACE OF HEAD FED SPEC SINGLE TREATMENT RESPONSE QQ-C-320, TYE 1, CLASS2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| S4928913-10-35 | 27624 |
| S4928913-10-35 | 50945 |
| S4928913-10-35 | 56878 |
| S4928913-10-35 | 88277 |
| S4928913-10-35 | 97928 |
| S4928913-10-35 | 06950 |
| S4928913-10-35 | 06725 |
| S4928913-10-35 | 0K620 |
| S4928913-10-35 | 17446 |