NSN 5306-01-530-4265 · NIIN 015304265 · FSC 5306
NO DASHES 5306015304265
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Application: F-18 E/F
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASK | HEAD STYLE | |
| FEAT | SPECIAL FEATURES | BOLT-CLOSE TOLERANCE, SPLINE DRIVE CRES(125 KSI FSU) DRILLED,SHORT THREAD |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.210 |
| AAUR | GRIP DIAMETER | INCHES NOMINAL 0.374 |
| AAZH | HEAD MINOR DIAMETER | INCHES MINIMUM 0.546 AND INCHES MAXIMUM 0.574 |
| AGAV | END ITEM IDENTIFICATION | F-18 E/F |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.231 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 2.913 |
| AASA | THREAD LENGTH | INCHES NOMINAL 2.703 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| AAJD | THREAD CLASS | 3A |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PBF1265-6D37 | 27624 |
| ST3M744-6D37 | 58998 |
| ST3M744-6D37 | 76301 |
| 122895-6D37 | 80539 |
| VCG0001-6D37 | 06710 |
| VS3174-6D37 | 06950 |
| AIC687-6D37 | 06725 |
| 122895-6D37 | 0PTK6 |
| ST3M744-6D37 | 0ZC92 |