BOLT,CLOSE TOLERANCE

Name: BOLT,CLOSE TOLERANCE
Brand: Atlas Air Supply
SKU: 5306015414120
Availability: LimitedAvailability

Bolts

Application: F/A-18 E/F AIRCEAFT

Technical characteristics

19 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AASA	THREAD LENGTH	INCHES MINIMUM 0.410 AND INCHES MAXIMUM 0.440
AASL	HEAD DIAMETER	INCHES MINIMUM 0.358 AND INCHES MAXIMUM 0.365
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
CMLP	THREAD QUANTITY PER INCH	28
CRSQ	COUNTERSINK ANGLE	DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT,100 DEG REDUCED HEAD,GEAR DRIVE RECESS,INCONEL 718 (125 KSI SHEAR),0.0156 INCH OVERSIZE
FEAT	SPECIAL FEATURES	TYPE OF INTERNAL DRIVE IS SIX LOBE RECESS PER NAS 1800; THERE IS A COTTER PIN HOLE 0.076 INCH DIA AT THE END OF THE FASTENER 0.106 INCH FROM TIP; THERE IS NO LUBRICATION ON FASTENER; MATERIAL IS INCONEL 718 W/125 KSI SHEAR
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-L-87132,TY 1,GR B W TO CETYL ALCOHOL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5662
SFTT	SURFACE TREATMENT	OVERALL PASSIVATE
ANEE	GRIP LENGTH	INCHES MINIMUM 0.558 AND INCHES MAXIMUM 0.578
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASU	HEAD HEIGHT	INCHES NOMINAL 0.057
AASK	HEAD STYLE
AAUR	GRIP DIAMETER	INCHES MINIMUM 0.264 AND INCHES MAXIMUM 0.265
AGAV	END ITEM IDENTIFICATION	F/A-18 E/F AIRCEAFT
AHYM	NOMINAL THREAD DIAMETER	INCHES 0.250
AASB	FASTENER LENGTH	INCHES MINIMUM 1.135 AND INCHES MAXIMUM 1.165

10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.