NSN 5306-01-556-4674 · NIIN 015564674 · FSC 5306
NO DASHES 5306015564674
In Stock
BOLT,MACHINE
Bolts
Application: MRAP - COMMON NSN - USED ON 4 MRAP VARIANTS AND 1 OTHER WEAPON SYSTEM
Technical characteristics
13 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES MINIMUM 0.470 AND INCHES MAXIMUM 0.500 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.551 AND INCHES MAXIMUM 0.562 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.226 AND INCHES MAXIMUM 0.243 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.470 AND INCHES MAXIMUM 0.500 |
| AASK | HEAD STYLE | |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| FEAT | SPECIAL FEATURES | HEAQD MARKING, MANUFACTURER'S ID AND 6 RADIAL LINES 60 DEGREES APART; COATING, LIGHT PROTECTIVE OIL |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE SAE J429 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT 0,3/8-16 X 0.50,HEX CAP SCREWS, GRADE 8, PLAIN FINISH |
| AGAV | END ITEM IDENTIFICATION | MRAP - COMMON NSN - USED ON 4 MRAP VARIANTS AND 1 OTHER WEAPON SYSTEM |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 24838R1 | 338X5 |
| S-264B | 78500 |
| 24838R1 | 89346 |
| 14101 | 0Y3H3 |
| 12759-00484 | 0Y3H3 |
Supersedes
This item replaces cancelled NIIN 015357286. An older drawing citing one of those numbers resolves here.