NSN 5306-01-556-4978 · NIIN 015564978 · FSC 5306
NO DASHES 5306015564978
In Stock
BOLT,MACHINE
Bolts
Application: MRAP - UNIQUE NSN - USED ON 4 MRAP VARIANTS; MRAP - MAXXPRO DASH ISS W/OGPK AND W/CROWS
Technical characteristics
13 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, M10 X 25 HEX FLANGE |
| FEAT | SPECIAL FEATURES | M 10X 1.5-6G LENGTH 45MM; GRADE: 8.8; BOLT, HEX FLANGE |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL ZINC |
| AATB | WIDTH BETWEEN FLATS | MILLIMETERS NOMINAL 13.3 |
| AGAV | END ITEM IDENTIFICATION | MRAP - UNIQUE NSN - USED ON 4 MRAP VARIANTS; MRAP - MAXXPRO DASH ISS W/OGPK AND W/CROWS |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 145000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 39.0 |
| AHYM | NOMINAL THREAD DIAMETER | MILLIMETERS 10.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | MILLIMETERS NOMINAL 45.0 |
| AASB | FASTENER LENGTH | MILLIMETERS NOMINAL 45.0 |
| THSD | THREAD SERIES DESIGNATOR | M |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| EMD-1262 | 338X5 |
| 1821646C1 | 338X5 |
| 12759-00506 | 0Y3H3 |
| 0161836 | 0Y3H3 |