NSN 5306-01-599-4535 · NIIN 015994535 · FSC 5306
NO DASHES 5306015994535
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.070 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-L-87132, TYE 1, GRADE B |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.2931 AND INCHES MAXIMUM 0.3016 |
| AASK | HEAD STYLE | |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.970 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.345 |
| AAJD | THREAD CLASS | 3A |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2021 AND INCHES MAXIMUM 0.2026 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.625 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 90.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5662 |
Cross-references
16 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3M1277E3D10A | 1EM77 |
| 3M1277E3D10A | 1VSL7 |
| TX1027E3D10XA | 27624 |
| 3M1277E3D10A | 4WL75 |
| TX1027E3D10XA | 56878 |
| 11861E3D10A | 59563 |
| 3M1277E3D10A | 58998 |
| WC1277E3D10A | 60516 |
| TX1027E3D10XA | 73197 |
| 3M1277E3D10A | 76301 |
| TX1027E3D10XA | 80539 |
| TX1027E3D10XA | 06725 |
| TX1027E3D10XA | 06950 |
| 3M1277E3D10A | 06710 |
| 3M1277E3D10A | 0K6Z0 |
| 3M1277E3D10A | 0ZC92 |