NSN 5306-01-599-4548 · NIIN 015994548 · FSC 5306
NO DASHES 5306015994548
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.875 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 90.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5662 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-L-87132, TYE 1, GRADE B |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.425 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 2.300 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.3859 AND INCHES MAXIMUM 0.3948 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.076 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2648 AND INCHES MAXIMUM 0.2651 |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3M1277E4D30XA | 1EM77 |
| 3M1277E4D30A | 1EM77 |
| 3M1277E4D30A | 1VSL7 |
| TX1027E4D30XA | 27624 |
| TX1027E4D30XA | 56878 |
| 11861E4D30A | 59563 |
| 3M1277E4D30A | 58998 |
| TX1027E4D30XA | 73197 |
| 3M1277E4D30A | 76301 |
| TX1027E4D30XA | 80539 |
| TX1027E4D30XA | 06725 |
| TX1027E4D30XA | 06950 |
| 3M1277E4D30A | 06710 |
| 3M1277E4D30A | 0K6Z0 |
| TX1027E4D30XA | 0PTK6 |