NSN 5306-01-624-8689 · NIIN 016248689 · FSC 5306
NO DASHES 5306016248689
In Stock
BOLT,SHEAR
Bolts
Application: F-15SA
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.2805 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.468 |
| AAJD | THREAD CLASS | 3A |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.300 |
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 0.348 |
| AATC | EXTENDED WASHER DIAMETER | INCHES NOMINAL 0.433 |
| AATD | EXTENDED WASHER THICKNESS | INCHES NOMINAL 0.069 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.081 |
| AGAV | END ITEM IDENTIFICATION | F-15SA |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.2500 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.8125 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.0885 AND INCHES MAXIMUM 1.0985 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT-CLOSE TOLERANCE, 12 POINT, FLANGE HEAD, 220 KSI FTU, CRES |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST3M571-4D13 | 27624 |
| ST3M571-4D13 | 57928 |
| ST3M571-4D13 | 56878 |
| ST3M571-4D13 | 58998 |
| ST3M571-4D13 | 73197 |
| ST3M571-4D13 | 76301 |
| ST3M571-4D13 | 06950 |
| ST3M571-4D13 | 06725 |
| ST3M571-4D13 | 06710 |
| ST3M571-4D13 | 0ZC92 |
| ST3M571-4D13 | 17446 |