NSN 5306-01-624-9374 · NIIN 016249374 · FSC 5306
NO DASHES 5306016249374
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Application: F-15SA
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.397 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 3.522 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.164 |
| AATB | WIDTH BETWEEN FLATS | INCHES MAXIMUM 0.439 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.081 |
| AGAV | END ITEM IDENTIFICATION | F-15SA |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.2500 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 3.125 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 3.401 AND INCHES MAXIMUM 3.411 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PBF1253-4D50 | 27624 |
| 109453-4D50 | 56878 |
| WC453-4D50 | 60516 |
| MB61-4D50 | 73197 |
| ST3M453-4D50 | 76301 |
| 109453-4D50 | 80539 |
| VAL23029-4D50 | 06710 |
| AIC753-4D50 | 06725 |
| VS3204-4D50 | 06950 |
| SLB252-4D50 | 16258 |