NSN 5306-01-632-0119 · NIIN 016320119 · FSC 5306
NO DASHES 5306016320119
In Stock
BOLT,INTERNAL WRENCHING
Bolts
Application: F-35
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.3125 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | F-35 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.4375 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 23180 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,INTERNAL WRENCHING |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST MATERIAL RESPONSE A-S 5662 OR ASSN STD 2ND MATERIAL RESPONSE A-S 5962 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.675 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.285 AND INCHES MAXIMUM 1.315 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES NOMINAL 0.905 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST TREATMENT RESPONSE A-S-QQ--35 OR ASSN STD 2ND TREATMENT RESPONSE A-S 2700 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JSFB10-7-10 | 1GP79 |
| JSFB10-7-10 | 1EM77 |
| JSFB10-7-10 | 1VSL7 |
| JSFB10-7-10 | 27624 |
| JSFB10-7-10 | 58794 |
| JSFB10-7-10 | 58998 |
| JSFB10-7-10 | 80539 |
| JSFB10-7-10 | 81755 |
| JSFB10-7-10 | 06725 |
| JSFB10-7-10 | 0K6Z0 |
| JSFB10-7-10 | 0UCY9 |