NSN 5306-01-642-7983 · NIIN 016427983 · FSC 5306
NO DASHES 5306016427983
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.5525 AND INCHES MAXIMUM 1.5725 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4981 AND INCHES MAXIMUM 0.4995 |
| AAWU | SINGLE SHEAR STRENGTH | POUNDS PER SQUARE INCH (PSI) 125000 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.420 AND INCHES MAXIMUM 0.440 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.637 AND INCHES MAXIMUM 0.651 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.818 AND INCHES MAXIMUM 0.828 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.113 AND INCHES MAXIMUM 0.133 |
| AASK | HEAD STYLE | |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.813 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.3605 AND INCHES MAXIMUM 2.3905 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE ALU-INU- IG-ENTED COATING IAW B-S10-85,TYE I |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 81205-BACB30US |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD SINGLE MATERIAL RESPONSE A-S5662 OR 5962 |
| AAJD | THREAD CLASS | 3A |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,12 POINT HEAD,220 KSI MIN TENSILE,125 KSI MIN SHEAR,NICKEL ALLOY 718(NOMINAL AND OVERSIZE) |
| FEAT | SPECIAL FEATURES | FATIGUE LOW LOAD IS 1960 AND FATIGUE HIGH LOAD IS 19600;MAXIMUM SERVICE TEMPERATURE IS 350 DEGREES F;HEAD TO BE MARKED WITH PART NUMBER CONFIGURATION IAW BACB30US STANDARD |
| HUES | COLOR | THREADS BLACK |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BACB30US8K25 | 1RC86 |
| BACB30US8K25 | 27624 |
| BACB30US8K25 | 57928 |
| BACB30US8K25 | 56878 |
| BACB30US8K25 | 81205 |
| BACB30US8K25 | 06725 |
| BACB30US8K25 | 06950 |
| BACB30US8K25 | 06710 |
| BACB30US8K25 | 17446 |
| BACB30US8K25 | 17943 |