NSN 5306-01-705-3645 · NIIN 017053645 · FSC 5306
NO DASHES 5306017053645
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Application: EA-18G SUPER HORNET AIRCRAFT
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AATD | EXTENDED WASHER THICKNESS | INCHES NOMINAL 0.045 |
| AATC | EXTENDED WASHER DIAMETER | INCHES NOMINAL 0.580 |
| ABQJ | POINT STYLE | |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.551 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.312 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.3125 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.6875 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CWDK | POINT CHAMFER ANGLE | DEGREES NOMINAL 45.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT - CLOSE TOLERANCE, SPLINE DRIVE, FLANGE HEAD |
| AAZH | HEAD MINOR DIAMETER | INCHES NOMINAL 0.375 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 2.2385 |
| AAUY | POINT LENGTH | INCHES NOMINAL 0.05 |
| AAJD | THREAD CLASS | 3A |
| AGAV | END ITEM IDENTIFICATION | EA-18G SUPER HORNET AIRCRAFT |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST3M753 | 76301 |
| ST3M753-5-27 | 76301 |