NSN 5306-01-705-8628 · NIIN 017058628 · FSC 5306
NO DASHES 5306017058628
In Stock
BOLT,SHEAR
Bolts
Application: C-5
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES NOMINAL 0.735 |
| AGAV | END ITEM IDENTIFICATION | C-5 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.116 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.74 AND INCHES MAXIMUM 2.76 |
| ASXK | HOLE QUANTITY | 3 |
| BQDM | HOLE TYPE | DRILLED |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 3.259 AND INCHES MAXIMUM 3.279 |
| AAJD | THREAD CLASS | 3A |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.741 AND INCHES MAXIMUM 0.752 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.470 AND INCHES MAXIMUM 3.500 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.265 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S-QQ--416,TYE II,CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.080 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4979 AND INCHES MAXIMUM 0.4985 |
| MATT | MATERIAL | OVERALL IRON ALLOY 660 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5853 OR 5737;COLD WORKED AND HEAT TREATED OT -EET THE REQUIRE-ENTS OF BS-F-69 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,HEX HEAD,160 KSI MIN TENSILE,LONG THREAD,1286,SELF-LOCKING AND NON-LOCKING(NOMINAL AND OVERSIZE) |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BACB30LM8DH44 | 1RC86 |
| BACB30LM8DH44 | 27624 |
| BACB30LM8DH44 | 56878 |
| BACB30LM8DH44 | 81205 |
| BACB30LM | 81205 |
| BACB30LM8DH44 | 06725 |
| BACB30LM8DH44 | 06710 |
| BACB30LM8DH44 | 17943 |