NSN 5306-01-718-5280 · NIIN 017185280 · FSC 5306
NO DASHES 5306017185280
In Stock
BOLT,INTERNAL WRENCHING
Bolts
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | |
| AASK | HEAD STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.500 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416, TYE II, CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.818 AND INCHES MAXIMUM 0.828 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 1.250 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 7.250 |
| MATT | MATERIAL | OVERALL STEEL |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.3755 AND INCHES MAXIMUM 0.3785 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 34.0 AND ROCKWELL C MAXIMUM 40.0 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 02-0067 | 78062 |
| 02-0067-8-116 | 78062 |