NSN 5306-01-719-7897 · NIIN 017197897 · FSC 5306
NO DASHES 5306017197897
In Stock
BOLT,INTERNAL WRENCHING
Bolts
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.375 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.055 AND INCHES MAXIMUM 0.060 |
| ABQZ | INTERNAL DRIVE STYLE | |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.3130 AND INCHES MAXIMUM 0.3150 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY II,CL 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.937 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 4.875 |
| AASK | HEAD STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ASXK | HOLE QUANTITY | 4 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 34.0 AND ROCKWELL C MAXIMUM 40.0 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,INTERNAL WRENCHING |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -ATERIAL TO CONFOR- TO -S20006 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.639 AND INCHES MAXIMUM 0.649 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 02-0067 | 78062 |
| 02-0067-6-78 | 78062 |
| 23143-FIND NO-32 | 78062 |