NSN 5306-01-730-5561 · NIIN 017305561 · FSC 5306
NO DASHES 5306017305561
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AASB | FASTENER LENGTH | INCHES NOMINAL 3.151 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.566 |
| AAJD | THREAD CLASS | 3A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S 5629 |
| AATD | EXTENDED WASHER THICKNESS | INCHES NOMINAL 0.178 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.7485 AND INCHES MAXIMUM 0.7490 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.750 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 2.00 |
| ASXK | HOLE QUANTITY | 4 |
| BQDM | HOLE TYPE | DRILLED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 1.151 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT-TENSION, 12 POINT, EXTERNAL WRENCHING, 220 KSI MIN T |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.060 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.797 AND INCHES MAXIMUM 0.812 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 1.220 AND INCHES MAXIMUM 1.230 |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| LD111-0020 THRU LD111-0046 | 43999 |
| LD111-0020-1232 | 43999 |