NSN 5306-00-145-7659 · NIIN 001457659 · FSC 5306
NO DASHES 5306001457659
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.265 AND INCHES MAXIMUM 1.312 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.140 AND INCHES MAXIMUM 0.172 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CRHC | HOLE CONFIGURATION STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.437 AND INCHES MAXIMUM 0.516 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.440 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.046 AND INCHES MAXIMUM 0.056 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2487 AND INCHES MAXIMUM 0.2492 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.796 AND INCHES MAXIMUM 0.828 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TYE 2 CLASS 3 |
| AAJD | THREAD CLASS | 3A |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 63.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 1.124 |