NSN 5306-01-108-2520 · NIIN 011082520 · FSC 5306
NO DASHES 5306011082520
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.828 AND INCHES MAXIMUM 0.878 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.338 AND INCHES MAXIMUM 3.368 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.440 AND INCHES MAXIMUM 0.460 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.922 AND INCHES MAXIMUM 0.932 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.047 AND INCHES MAXIMUM 0.077 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4985 AND INCHES MAXIMUM 0.4995 |
| AAZH | HEAD MINOR DIAMETER | INCHES MINIMUM 0.644 AND INCHES MAXIMUM 0.651 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.490 AND INCHES MAXIMUM 2.510 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S6487 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-8837,TYE 2,CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |