NSN 5307-00-206-7417 · NIIN 002067417 · FSC 5307
NO DASHES 5307002067417
In Stock
STUD,PLAIN
Studs
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNS |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2400 |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNF |
| CSYM | SURFACE FINISH | NUT THD MICROINCHES 32.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 6322 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| AAJD | THREAD CLASS | 3A |
| AAJE | THREAD PITCH DIAMETERS | STUD THREAD INCHES 0.2248 TO 0.2263 |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| CSYM | SURFACE FINISH | SHANK MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | STUD THD MICROINCHES 32.0 |
| MATT | MATERIAL | STEEL COMP 8740 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.678 AND INCHES MAXIMUM 1.698 |
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | FIRST HOLE INCHES MINIMUM 0.100 AND INCHES MAXIMUM 0.120 |
| ADDV | COTTER PIN HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.065 AND INCHES MAXIMUM 0.072 |
| AASA | THREAD LENGTH | NUT THREAD INCHES MINIMUM 0.562 |
| AASA | THREAD LENGTH | STUD THREAD INCHES MINIMUM 0.688 |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.250 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.250 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AN128437 | 88044 |
| AS128363 THRU AS128686 | 0U583 |
| AN128437 | 0U583 |