NSN 5307-00-264-2894 · NIIN 002642894 · FSC 5307
NO DASHES 5307002642894
In Stock
STUD,PLAIN
Studs
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJE | THREAD PITCH DIAMETERS | STUD THREAD INCHES 0.1678 TO 0.1690 |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | NUT THREAD INCHES MAXIMUM 0.375 |
| AASA | THREAD LENGTH | STUD THREAD INCHES MAXIMUM 0.375 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.812 |
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | FIRST HOLE INCHES NOMINAL 0.094 |
| ADDV | COTTER PIN HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.062 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 23.0 AND ROCKWELL C MAXIMUM 32.0 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.190 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.190 |
| MATT | MATERIAL | STEEL |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNF |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNIFIED NATIONAL COARSE (UNC) |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 006381301. An older drawing citing one of those numbers resolves here.