NSN 5307-00-442-6105 · NIIN 004426105 · FSC 5307
NO DASHES 5307004426105
In Stock
STUD,PLAIN
Studs
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE SAE |
| MATT | MATERIAL | STEEL COMP 3135 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.312 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.312 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 30.0 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AASA | THREAD LENGTH | STUD THREAD INCHES MINIMUM 0.625 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.375 |
| AAJE | THREAD PITCH DIAMETERS | STUD THREAD INCHES 0.2819 TO 0.2835 |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | NUT THREAD INCHES MINIMUM 0.437 |
| ADDV | COTTER PIN HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.062 |
| AAJD | THREAD CLASS | 3A |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNF |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | FIRST HOLE INCHES NOMINAL 0.109 |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNS |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 002076268. An older drawing citing one of those numbers resolves here.