NSN 5307-00-567-9656 · NIIN 005679656 · FSC 5307
NO DASHES 5307005679656
In Stock
STUD,RECESSED
Studs
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADDA | DIAMETER OF RECESSED PORTION OF SHANK | INCHES MINIMUM 0.325 AND INCHES MAXIMUM 0.335 |
| STYL | STYLE DESIGNATOR | |
| AAJD | THREAD CLASS | 3A |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 34.0 AND ROCKWELL C MAXIMUM 40.0 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.438 |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | NUT THREAD INCHES MINIMUM 1.240 AND INCHES MAXIMUM 1.260 |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2400 |
| ADCZ | LENGTH OF RECESSED PORTION OF SHANK | INCHES MINIMUM 4.750 AND INCHES MAXIMUM 4.890 |
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | FIRST HOLE INCHES MINIMUM 8.110 AND INCHES MAXIMUM 8.140 |
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | SECOND HOLE INCHES MINIMUM 8.110 AND INCHES MAXIMUM 8.140 |
| ADDV | COTTER PIN HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.107 AND INCHES MAXIMUM 0.114 |
| AWTQ | DISTANCE ACROSS FLATS | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.377 |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.438 |
| CSYM | SURFACE FINISH | SHANK MICROINCHES 64.0 |
| MATT | MATERIAL | STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 6322 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 6327 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| AASA | THREAD LENGTH | STUD THREAD INCHES MINIMUM 0.660 AND INCHES MAXIMUM 0.780 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 8.250 AND INCHES MAXIMUM 8.270 |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNF |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD WHITWORTH |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 203170P004 | 77445 |
| 203170P4 | 77445 |
| 203170P004 | 00198 |
Supersedes
This item replaces cancelled NIIN 005116857. An older drawing citing one of those numbers resolves here.