NSN 5307-00-942-5580 · NIIN 009425580 · FSC 5307
NO DASHES 5307009425580
In Stock
STUD,RECESSED AND STEPPED
Studs
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 24 |
| FEAT | SPECIAL FEATURES | RECESSED AT BOTH ENDS OF SHANK |
| ADDA | DIAMETER OF RECESSED PORTION OF SHANK | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.252 |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNF |
| AASA | THREAD LENGTH | STUD THREAD INCHES MINIMUM 1.000 AND INCHES MAXIMUM 1.100 |
| STYL | STYLE DESIGNATOR | |
| AAJD | THREAD CLASS | 3A |
| MATT | MATERIAL | STEEL COMP 310 OR STEEL |
| ADCZ | LENGTH OF RECESSED PORTION OF SHANK | INCHES MINIMUM 0.290 AND INCHES MAXIMUM 0.310 |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 7.020 AND INCHES MAXIMUM 9.080 |
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | FIRST HOLE INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.130 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.312 |
| AASA | THREAD LENGTH | NUT THREAD INCHES MINIMUM 1.000 AND INCHES MAXIMUM 1.100 |
| ADDV | COTTER PIN HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.062 AND INCHES MAXIMUM 0.075 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD 1ST MATERIAL RESPONSE AISI310 AND ASSN STD 2ND MATERIAL RESPONSE A-S5613 AND MIL SPEC SINGLE MATERIAL RESPONSE -S7470 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |