NSN 5307-01-188-1229 · NIIN 011881229 · FSC 5307
NO DASHES 5307011881229
In Stock
STUD,RECESSED AND STEPPED
Studs
Application: MRAP - COMMON NSN - USED ON MRAP NO PERMANENT WSDC IDENTIFIED AND 2 OTHER WEAPON SYSTEMS
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | NUT THREAD INCHES MINIMUM 0.850 AND INCHES MAXIMUM 0.910 |
| AASA | THREAD LENGTH | STUD THREAD INCHES MINIMUM 1.150 AND INCHES MAXIMUM 1.310 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.730 AND INCHES MAXIMUM 3.790 |
| AGAV | END ITEM IDENTIFICATION | MRAP - COMMON NSN - USED ON MRAP NO PERMANENT WSDC IDENTIFIED AND 2 OTHER WEAPON SYSTEMS |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CMLP | THREAD QUANTITY PER INCH | 11 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 38.0 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.500 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.625 |
| FEAT | SPECIAL FEATURES | NUT END SHOULDER TAPERS 45 DEG.MIN AND 60 DEG.MAX AND 0.410 IN.LONG |
| MATT | MATERIAL | STEEL COMP 4140 OR STEEL COMP 8640 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD ALL MATERIAL RESPONSES AST- A322 |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE G- 4435--,CODE A FSC- 34623 |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNF |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNIFIED NATIONAL COARSE (UNC) |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12339207 | 19207 |
| 5568298 | 34623 |
| EC12339207 | 34623 |
| 5307PL0783532 | 9009H |
| 0722726 | S3002 |