NSN 5307-01-214-6914 · NIIN 012146914 · FSC 5307
NO DASHES 5307012146914
In Stock
STUD,SHOULDERED
Studs
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | NUT THREAD INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
| AASA | THREAD LENGTH | STUD THREAD INCHES MINIMUM 0.670 AND INCHES MAXIMUM 0.690 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.480 AND INCHES MAXIMUM 0.520 |
| AAVK | SHOULDER LENGTH | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.125 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.880 |
| ADDB | NUT END SHANK LENGTH | INCHES MINIMUM 0.330 AND INCHES MAXIMUM 0.350 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.250 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.250 |
| CSYM | SURFACE FINISH | SHOULDER BEARING SURFACE MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | OVERALL MICROINCHES 125.0 |
| CTDT | NUT END SHANK DIAMETER | INCHES MINIMUM 0.280 AND INCHES MAXIMUM 0.285 |
| FEAT | SPECIAL FEATURES | SHOULDER IS D-SHAPED WITH CENTER TO FLAT 0.245-0.255 IN. |
| MATT | MATERIAL | NICKEL ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 7471 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JH410 | 8M097 |
| VFQ401-2 | 06710 |
| 9953M93 | 07482 |
| 9953M93P06 | 07482 |
| 9953M93P02 | 07482 |