NSN 5307-01-231-7588 · NIIN 012317588 · FSC 5307
NO DASHES 5307012317588
In Stock
STUD,SHOULDERED
Studs
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | NUT THREAD INCHES NOMINAL 0.325 |
| AASA | THREAD LENGTH | STUD THREAD INCHES NOMINAL 0.325 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.377 |
| AAVK | SHOULDER LENGTH | INCHES MINIMUM 0.064 AND INCHES MAXIMUM 0.074 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.345 |
| ADDB | NUT END SHANK LENGTH | INCHES MINIMUM 0.183 AND INCHES MAXIMUM 0.193 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.190 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.190 |
| CSJZ | STUD END SHANK LENGTH | INCHES MINIMUM 0.433 AND INCHES MAXIMUM 0.443 |
| CSXH | STUD END SHANK DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| CTDT | NUT END SHANK DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| FEAT | SPECIAL FEATURES | HEX POINT DRIVE IN NUT END,0.0791 TO 0.0806 IN. DISTANCE ACROSS FLATS,0.115 TO 0.135 IN. DEEP |
| MATT | MATERIAL | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 13TH TREATMENT RESPONSE Q--416,TY 2,CL 2 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76301-3-930 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HL162PB-6-7-3 | 56878 |
| HL162PB-6-7-3 | 73197 |
| 3M930-3-7-3 | 76301 |
| HL162PB-6-7-3 | 92215 |
| HL162PB-6-7-3 | 97928 |
| HL162PB-6-7-3 | L4528 |
| HL162PB-6-7-3 | 17446 |