NSN 5307-01-257-0787 · NIIN 012570787 · FSC 5307
NO DASHES 5307012570787
In Stock
STUD,STEPPED
Studs
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJD | THREAD CLASS | 2A |
| AAJE | THREAD PITCH DIAMETERS | STUD THREAD INCHES 0.2218 TO 0.2233 |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | STUD THREAD INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AASA | THREAD LENGTH | NUT THREAD INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.562 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.164 AND INCHES MAXIMUM 0.174 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.490 AND INCHES MAXIMUM 1.510 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.250 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.190 |
| CSYM | SURFACE FINISH | STUD THD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | SHANK MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | NUT THD MICROINCHES 32.0 |
| MATT | MATERIAL | STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S6322 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S2400 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNF |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNS |