NSN 5307-01-270-8545 · NIIN 012708545 · FSC 5307
NO DASHES 5307012708545
In Stock
STUD,WELDING
Studs
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES NOMINAL 0.750 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.687 |
| AAVK | SHOULDER LENGTH | INCHES MINIMUM 0.093 AND INCHES MAXIMUM 0.125 |
| ADDD | UNTHREADED END DIAMETER | INCHES MINIMUM 0.325 AND INCHES MAXIMUM 0.335 |
| ADDE | UNTHREADED END LENGTH | INCHES MINIMUM 2.735 AND INCHES MAXIMUM 2.813 |
| ADDF | LENGTH EXCLUDING FLUXED WELDING TIP | INCHES MINIMUM 3.750 AND INCHES MAXIMUM 3.781 |
| CBBL | FEATURES PROVIDED | FLUX |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.375 |
| CWFC | OVERALL LENGTH AFTER WELDING | INCHES NOMINAL 3.125 |
| FEAT | SPECIAL FEATURES | WELDING END TO BE FLUX COATED WITH COMMERCIALLY PURE ALUMINUM |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-24149 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 2 AND CLASS 4 |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY THREAD LENGTH |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-S-24149/1 | 81349 |
| MIL-S-24149 | 81349 |
| M24149/1-554 | 81349 |