NSN 5307-01-665-4702 · NIIN 016654702 · FSC 5307
NO DASHES 5307016654702
In Stock
STUD,PLAIN
Studs
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | NUT THREAD A RIGHT-HAND |
| MATT | MATERIAL | STEEL COMP 4340 OR STEEL COMP 8740 |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD A UNJS |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.320 |
| SFTT | SURFACE TREATMENT | OVERALL OXIDE |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AASA | THREAD LENGTH | NUT THREAD A INCHES NOMINAL 0.781 |
| AASA | THREAD LENGTH | NUT THREAD B INCHES NOMINAL 0.480 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD B INCHES 0.3125 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | STUD, STRAIGHT VENTED, .3125-18 X .3125-24, 180 KSI |
| AAJF | THREAD DIRECTION | NUT THREAD B RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| AAJE | THREAD PITCH DIAMETERS | NUT THREAD A INCHES 0.2810 TO 0.2825 |
| FEAT | SPECIAL FEATURES | HEAT TREAT: 180-200 KSI ULTIMATE TENSILE STRENGTH PER AMS-H-6875 OR AMS2759; END B HAS A 0.60-.078 DIA THRU; |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 39.5 AND ROCKWELL C MAXIMUM 43.0 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD A INCHES 0.3125 |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD B UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAJE | THREAD PITCH DIAMETERS | NUT THREAD B INCHES 0.2810 TO 0.2825 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-DTL-13924 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 97499-120-236 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NATIONAL STD/SPEC 1ST MATERIAL RESPONSE A-S 6414 OR NATIONAL STD/SPEC 2ND MATERIAL RESPONSE A-S 6322 OR NATIONAL STD/SPEC 3RD MATERIAL RESPONSE A-S6325 OR NATIONAL STD/SPEC 4TH MATERIAL RESPONSE A-S6327 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |