NSN 5307-01-309-8825 · NIIN 013098825 · FSC 5307
NO DASHES 5307013098825
In Stock
STUD,LOCKED IN
Studs
Application: F100PW0229 ENGINE/FAN
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | NUT THREAD INCHES MINIMUM 1.235 AND INCHES MAXIMUM 1.265 |
| AAUM | LOCKING FEATURE | KEY INSERTS |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.190 |
| AAVK | SHOULDER LENGTH | INCHES MINIMUM 0.032 AND INCHES MAXIMUM 0.042 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.500 |
| ADCV | DISTANCE FROM SHOULDER PORTION TO NUT END | INCHES MINIMUM 1.235 AND INCHES MAXIMUM 1.265 |
| AGAV | END ITEM IDENTIFICATION | F100PW0229 ENGINE/FAN |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.190 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.250 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| FEAT | SPECIAL FEATURES | KEY HEAT TREATED TO RC 48 MIN.; THIS KEYLOCKED STUD FOR THE FRONT AND REAR FAN DUCTS ON THE F100-229 ENGINE. IT IS MADE OF AMS 7482(IRON-NICKEL-CHROME ALLOY, 0.185" DIAMETER X 1.50 LONG). FAILURE OF THESE STUDS WOULD NOT CAUSE AN ENGINE SHUT DOWN OR CATASTROPHIC FAILURE. IT WOULD CAUSE MAINTENANCE BURDEN TO REMOVE AND REPLACE |
| MATT | MATERIAL | NICKEL ALLOY AND STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5698 AND ASSN STD SINGLE MATERIAL RESPONSE A-S 5737 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |