NSN 5307-01-177-5949 · NIIN 011775949 · FSC 5307
NO DASHES 5307011775949
In Stock
STUD,SHOULDERED
Studs
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | NUT THREAD INCHES NOMINAL 1.500 |
| AASA | THREAD LENGTH | STUD THREAD INCHES NOMINAL 1.460 |
| AAVK | SHOULDER LENGTH | INCHES NOMINAL 0.275 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 7.030 |
| ADDB | NUT END SHANK LENGTH | INCHES NOMINAL 2.595 |
| AWTQ | DISTANCE ACROSS FLATS | INCHES NOMINAL 2.000 |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 1.000 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 1.000 |
| CSJZ | STUD END SHANK LENGTH | INCHES NOMINAL 0.380 |
| CSXH | STUD END SHANK DIAMETER | INCHES MINIMUM 1.497 AND INCHES MAXIMUM 1.498 |
| CTDT | NUT END SHANK DIAMETER | INCHES MINIMUM 1.497 AND INCHES MAXIMUM 1.498 |
| FEAT | SPECIAL FEATURES | 220,000 PSI MIN TS;NUT END SHOULDER TAPERS 0.2370 IN. MIN AND 0.2380 IN. MAX. PER INCH OF LGTH; 0.042 IN.MIN AND 0.047 IN.MAX DIA HOLES THRU CORNERS OFEXT.HEX DRIVE; 0.270 IN.SPHER RADIUS BY 0.270 IN. DPIN HALF DOG PT. OF STUD END; OPTIONAL TURNING CENTER ON NUT END ONLY |
| MATT | MATERIAL | STEEL |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-8837 TY1,CL3 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |