NSN 5310-00-001-1847 · NIIN 000011847 · FSC 5310
NO DASHES 5310000011847
In Stock
NUT,PLAIN,SLOTTED,HEXAGON
Nuts and Washers
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | INCHES 0.500 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| BZRR | THREAD SERIES | UNF |
| ADEA | NUT HEIGHT | INCHES NOMINAL 0.562 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.738 AND INCHES MAXIMUM 0.752 |
| ACTA | NUT STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| FEAT | SPECIAL FEATURES | MATERIAL PER MIL-S-5000 OR MIL-S-6049; NUT HAS ROCKWELL HARDNESS OF C34-C39 IN ACCORDANCE WITH MIL-H-6875 CLASS A; 100% MAGNETIC PARTICLE INSPECTION PER MIL-I-6868 PERFORMED BY BOTH CIR. AND LONG. METHOD, THE WET OR DRY PROCESS WITH EITHER FLUOR. OR NON-FLUOR. SHALL BE USED, NO CRACKS ALLOWED; NUTS FINISHED PER QQ-P-416 TYPE II CL 3; BAKED AT 375 DEG F FOR 23 HOURS AFTER PLATING; EMBRITTLEMENT TEST PER QQ-P-416 DOES NOT APPLY; SURFACE FINISHED SHALL BE 125 UNLESS OTHERWISE SPECIFIED |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| SPCL | SPECIAL TEST FEATURES | ITEMS ARE BEING CODED AS CRITICAL TO INSURE SOURCE INSPECTION WILL BE PERFORMED AT THE POINT OF MANUFACTURE, PRIOR TO MATERIAL RECEIPT BY THE US NAVY OR OTHER DOD COMPONENTS. THESE ITEMS ARE PIECE PARTS OR END ITEMS IN SUPPORT OF VITAL MILITARY HARDWARE NECESSARY TO SUSTAIN THE SUCCESSFUL MISSION OF THE SHIPS, SUBMARINES, AND SHORE STATIONS OF THE US NAVY. CRITICAL FEATURES INCLUDING, BUT NOT LIMITED TO, DIMENSIONS, TOLERANCES/CLEARANCES, ELECTRONIC CHARACTERISTICS, AND METALLURGICAL PROPERTIES WILL BESPECIFIED FOR GOVERNMENT Q AR (QUALITY ASSURANCE REPRESENTATIVES) TO INSURE THE HIGHEST POSSIBLE DEGREE OF QUALITY AND RELIABILITY OF THESE PARTS BEING DELIVERED UNDER NAVICP CONTRACTS |
| CRTL | CRITICALITY CODE JUSTIFICATION | SPCL |
| CRTM | BEARING SURFACE TYPE | WASHER FACED |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.