NSN 5310-00-033-1830 · NIIN 000331830 · FSC 5310
NO DASHES 5310000331830
In Stock
NUT,PLAIN,KNURLED
Nuts and Washers
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAWY | COUNTERBORE DIAMETER | NUT INCHES MINIMUM 0.650 AND INCHES MAXIMUM 0.655 |
| ABPH | SMALL END DIAMETER | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
| ACTA | NUT STYLE | |
| ACTD | NUT DIAMETER | INCHES NOMINAL 1.000 |
| ADBG | NUT THICKNESS | INCHES MINIMUM 1.030 AND INCHES MAXIMUM 1.050 |
| ADBK | KNURL WIDTH | INCHES MINIMUM 0.280 AND INCHES MAXIMUM 0.300 |
| ADFK | NUT COUNTERBORE DEPTH | NUT INCHES MINIMUM 0.088 AND INCHES MAXIMUM 0.103 |
| AGGP | DRILLED HOLE DIAMETER | INCHES NOMINAL 0.075 |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 2 |
| BZRR | THREAD SERIES | UNF |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.625 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES MINIMUM 119.0 AND DEGREES MAXIMUM 121.0 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-268,T4 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625 |