NSN 5310-00-050-9372 · NIIN 000509372 · FSC 5310
NO DASHES 5310000509372
In Stock
NUT,SELF-LOCKING,HEXAGON
Nuts and Washers
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| ABAJ | LUBRICATION | SOLUBLE LUBRICANT |
| ACTA | NUT STYLE | |
| ADEA | NUT HEIGHT | INCHES MAXIMUM 0.407 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.928 AND INCHES MAXIMUM 0.940 |
| AZKQ | TEMP RATING | FAHRENHEIT MAXIMUM 250.0 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.625 |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES MINIMUM 88.0 |
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| CSXL | BEARING SURFACE FINISH | MICROINCHES 125.0 |
| MATT | MATERIAL | LOCKING INSERT PLASTIC POLYAMIDE NYLON |
| MATT | MATERIAL | NUT STEEL CORROSION RESISTING |
| SFTT | SURFACE TREATMENT | OVERALL EXCEPT INSERT PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL EXCEPT INSERT FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| L79NTE-1018 | 27687 |
| 002-004048-011 | 26916 |
| 803-5001003-X8XX-10 | 53711 |
| 79NTE-108 | 72962 |
| NASM25027 | 80205 |
| NASM21083C10 | 80205 |
| MS21083C10 | 80205 |
| 5310PL0958378 | 9009H |
| MS21083C10 | 96906 |
| 0.62518UNF3BT1G 405NSA/BEB | D9182 |
| 79NTE-108 | 019L2 |
Supersedes
This item replaces cancelled NIINs 013723942 · 016034422 · 008851882. An older drawing citing one of those numbers resolves here.