NSN 5310-00-094-1750 · NIIN 000941750 · FSC 5310
NO DASHES 5310000941750
In Stock
NUT,PLAIN,ROUND
Nuts and Washers
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADBG | NUT THICKNESS | INCHES NOMINAL 0.468 |
| ADBH | DRIVE POINT WIDTH | INCHES NOMINAL 0.313 |
| ADBJ | UNDERCUT THICKNESS | INCHES NOMINAL 0.281 |
| ADBM | DRIVE POINT QUANTITY | 4 |
| AGGP | DRILLED HOLE DIAMETER | INCHES NOMINAL 0.070 |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 4 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL COARSE (UNC) |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.937 |
| ACTA | NUT STYLE | |
| ACTD | NUT DIAMETER | INCHES NOMINAL 2.438 |
| ABQU | DRIVE POINT DEPTH | INCHES NOMINAL 0.125 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABPH | SMALL END DIAMETER | INCHES MINIMUM 2.122 AND INCHES MAXIMUM 2.123 |
| AAJD | THREAD CLASS | 3B |
| MATT | MATERIAL | OVERALL STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-T-6736 |
| CRHC | HOLE CONFIGURATION STYLE |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 001222675. An older drawing citing one of those numbers resolves here.