NSN 5310-00-094-4398 · NIIN 000944398 · FSC 5310
NO DASHES 5310000944398
In Stock
NUT,PLAIN,ROUND
Nuts and Washers
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABPH | SMALL END DIAMETER | INCHES MINIMUM 4.030 AND INCHES MAXIMUM 4.090 |
| ABQU | DRIVE POINT DEPTH | INCHES MINIMUM 0.160 AND INCHES MAXIMUM 0.220 |
| ACTA | NUT STYLE | |
| ACTD | NUT DIAMETER | INCHES MINIMUM 4.030 AND INCHES MAXIMUM 4.090 |
| ADBG | NUT THICKNESS | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.573 |
| ADBH | DRIVE POINT WIDTH | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.280 |
| ADBM | DRIVE POINT QUANTITY | 2 |
| ALET | HOLE TYPE AND QUANTITY | TAPPED 12 |
| BZRR | THREAD SERIES | UN |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQJX | NOMINAL THREAD SIZE | INCHES 3.625 |
| CQTW | HOLE THREAD QUANTITY PER INCH | 28 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CSPF | HOLE NOMINAL THREAD DIAMETER | INCHES 0.250 |
| FEAT | SPECIAL FEATURES | FLANGE ON END OPPISITE DRIVE SLOTS 4.475 IN. DIA |
| MATT | MATERIAL | OVERALL STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM OR CHROMIUM |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 001225781. An older drawing citing one of those numbers resolves here.