NSN 5310-00-095-3409 · NIIN 000953409 · FSC 5310
NO DASHES 5310000953409
In Stock
NUT,PLAIN,ROUND
Nuts and Washers
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJE | THREAD PITCH DIAMETERS | INCHES 1.1604 TO 1.1644 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABPH | SMALL END DIAMETER | INCHES MINIMUM 1.590 AND INCHES MAXIMUM 1.610 |
| ABQU | DRIVE POINT DEPTH | INCHES NOMINAL 0.281 |
| ACTA | NUT STYLE | |
| ACTD | NUT DIAMETER | INCHES MINIMUM 1.990 AND INCHES MAXIMUM 2.010 |
| ADBG | NUT THICKNESS | INCHES MINIMUM 0.300 AND INCHES MAXIMUM 0.320 |
| ADBH | DRIVE POINT WIDTH | INCHES MINIMUM 0.178 AND INCHES MAXIMUM 0.198 |
| ADBJ | UNDERCUT THICKNESS | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| ADBM | DRIVE POINT QUANTITY | 6 |
| AGGP | DRILLED HOLE DIAMETER | INCHES NOMINAL 0.084 |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 6 |
| BZRR | THREAD SERIES | UNS |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 38.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.188 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES MINIMUM 89.0 AND DEGREES MAXIMUM 92.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6322 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 6323 |