NSN 5310-00-095-3655 · NIIN 000953655 · FSC 5310
NO DASHES 5310000953655
In Stock
NUT,PLAIN,ROUND
Nuts and Washers
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJE | THREAD PITCH DIAMETERS | INCHES 4.2584 TO 4.2624 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABPH | SMALL END DIAMETER | INCHES NOMINAL 5.000 |
| ABQU | DRIVE POINT DEPTH | INCHES MINIMUM 0.131 AND INCHES MAXIMUM 0.151 |
| ACTA | NUT STYLE | |
| AGGP | DRILLED HOLE DIAMETER | INCHES NOMINAL 0.128 |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 12 |
| BZRR | THREAD SERIES | UNS |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.188 |
| CRHC | HOLE CONFIGURATION STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 4640 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST MATERIAL RESPONSE A-S 6312 OR ASSN STD 2ND MATERIAL RESPONSE A-S 6322 |
| SFTT | SURFACE TREATMENT | OVERALL LEAD |
| AFGF | DRIVE POINT DIAMETER | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| ADBM | DRIVE POINT QUANTITY | 12 |
| ADBJ | UNDERCUT THICKNESS | INCHES MINIMUM 0.178 AND INCHES MAXIMUM 0.198 |
| ACTD | NUT DIAMETER | INCHES MINIMUM 5.302 AND INCHES MAXIMUM 5.322 |
| ADBG | NUT THICKNESS | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.448 |
| ADBH | DRIVE POINT WIDTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 93950 | 00198 |