NSN 5310-00-125-5364 · NIIN 001255364 · FSC 5310
NO DASHES 5310001255364
In Stock
WASHER,RECESSED
Nuts and Washers
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSYM | SURFACE FINISH | BOTTOM MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | TOP MICROINCHES 32.0 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.266 |
| CSTM | RECESS ANGLE | DEGREES NOMINAL 90.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.0445 AND INCHES MAXIMUM 0.0455 |
| ABMD | RECESS DIAMETER | INCHES NOMINAL 0.326 |
| ABMH | RECESS DEPTH | INCHES NOMINAL 0.030 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.455 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 62.0 |
| STYL | STYLE DESIGNATOR | |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 0.4375 AND INCHES MAXIMUM 0.4377 |
| MATT | MATERIAL | OVERALL STEEL |
| FEAT | SPECIAL FEATURES | BOTH BEARING SURFACES CHAMFERED ON OD 0.010 IN. TO 0.015 IN. BY 45 DEG |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 56590 | 93835 |