NSN 5310-00-208-3747 · NIIN 002083747 · FSC 5310
NO DASHES 5310002083747
In Stock
NUT,PLAIN,HEXAGON
Nuts and Washers
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL COMP 4130 |
| ADEA | NUT HEIGHT | INCHES NOMINAL 0.281 |
| CSXL | BEARING SURFACE FINISH | MICROINCHES 125.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | |
| AAJD | THREAD CLASS | 3B |
| AGGP | DRILLED HOLE DIAMETER | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.050 |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 3 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.627 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 34.0 AND ROCKWELL C MAXIMUM 38.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.438 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRSQ | COUNTERSINK ANGLE | BOTH ENDS DEGREES NOMINAL 110.0 |
| CRTM | BEARING SURFACE TYPE | CHAMFERED |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS509 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758,CONDITION F-4 |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 002989257. An older drawing citing one of those numbers resolves here.