NSN 5310-00-252-8076 · NIIN 002528076 · FSC 5310
NO DASHES 5310002528076
In Stock
NUT,PLAIN,ROUND
Nuts and Washers
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 18 |
| BZRR | THREAD SERIES | UNS |
| ADBG | NUT THICKNESS | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.448 |
| SPCL | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL--23199 |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| ACTA | NUT STYLE | |
| ACTD | NUT DIAMETER | INCHES MINIMUM 2.047 AND INCHES MAXIMUM 2.067 |
| ABQU | DRIVE POINT DEPTH | INCHES MINIMUM 0.084 AND INCHES MAXIMUM 0.104 |
| ADBH | DRIVE POINT WIDTH | INCHES MINIMUM 0.178 AND INCHES MAXIMUM 0.198 |
| ADBM | DRIVE POINT QUANTITY | 4 |
| AAJE | THREAD PITCH DIAMETERS | INCHES 1.3399 TO 1.3439 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.376 |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES MINIMUM 45.0 AND DEGREES MAXIMUM 60.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MATT | MATERIAL | OVERALL STEEL |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| N07 | 79500 |